fotomoto

fotomoto

fotomoto

Sunday, January 24, 2016

Fotasy Lens Adapter


Ok, so this is my first blog post of the year even though it may not be in my typical style. I don’t normally post equipment reviews but I wanted to share my experience with this product.

A few weeks ago I ordered up one of those cheap Fotasy lens adapters from Rainbow Imaging. I have a neat little Nikkor F Mount 50mm F1.4 lens that I’ve been wanting to try out with my Olympus. I knew going in that this was a cheap Chinese made accessory, with some quality control issues. I read about the various problems associated with the product, but since most of the reviews were favorable I decided to give it a shot.



My first impression was that it seemed heavier and sturdier than expected. It’s made of metal and felt pretty sturdy. On the body end of things, it’s a perfect fit with no issues attaching it or dismounting. But on the lens end of things, that’s where the issues were.

My particular copy was too tight, I couldn’t get the lens to attach fully to the adapter. It would only turn ¾ of the way, I just couldn’t get it past the point where it needed to go for the locking pin to engage. That meant that although it would stay on the adapter if the F-stop or focus ring weren’t touched. But as soon as I tried to focus or change the aperture, the lens would fall off. Ugh, frustrating. But I just wouldn’t give up.



I really have to thank the wonderful people that post their helpful tips on the internet because after an hour of unsuccessfully trying to get the lens mounted completely, I finally went on an internet search. My favorite photo forum site, dpreview.com, let me down in the search. Too many posts came up to sort through – ugh, my eyes! I hate reading online. But the link I am sharing here was the first one that popped up in the google search when searching for Fotasy loose adapter. Now my problem was the opposite, the lens adapter was too tight with the lens not fully attaching (rather than attaching easily but being loose once fully mounted.) So my solution was the opposite of the one recommended, I had to take a pair of pliers to lessen the gap in the "slits" as shown in the photos. I have shared the link at the end of this post, there you will find the instructions and many helpful photographs.



So now my neat little Nikkor is attached firmly. It works perfectly, I took a few photos and I was very happy. It does exactly what it is supposed to do, and the problem was easily fixed. One of the other problems I have heard is that the lever to release the locking pin can be easily broken, resulting in a lens that is permanently attached to the adapter. Not a problem I feel like experiencing, so I’ll just be leaving mine on it permanently. The only other Nikkor lens I own is a 50mm F1.8, cheaper build than my 1.4 and not as "bokehlicious." Also, as clearly noted in the item descriptions for this adapter, there is NO automatic diaphragm or autofocus. This adapter is for F mount lenses and you will need to change the aperture yourself and shoot in either Aperture priority or manual modes (shutter priority and full auto are not available.)



Conclusion:

For $10.99 including free shipping, I feel it was a worthwhile purchase. If I had more Nikon lenses that I would want to switch between, going for one of the pricier options may be the way to go ($45 to $400, that’s quite a range of pricier options.) The reviews that I read about the locking pin switch getting broken concern me. While handling the one that I just bought, I believe as long as you are not rough with it that it should be problem free. But in truth, I would not be willing to risk any pricey lenses on that assumption. And I did attempt to remove the lens after I attached it, and I have to say it’s hard to release the locking pin and it makes a clicking sound that doesn’t inspire confidence in the product. I won’t try to remove it again, I have no reason to.



I hope this quickie review helps you in making a purchase decision. I have no affiliation with Fotasy or Rainbow Imaging, or beomagi. I just wanted to share my experience with this product.



The post that saved me from wasting a couple of more hours figuring out a solution on my own:
http://beomagi.blogspot.com/2015/02/fix-loose-lens-adapter.html




Rainbow Imaging On Ebay (they also sell on Amazon, but I got mine from ebay because it was a little cheaper. But if you want to read the reviews you’ll need to go to Amazon.) I was pleased with their super fast service, and would not hesitate to order from them in the future.

Rainbow Imaging



Thank you for your support.



Check out my stores: 



Stay updated and see new photos on my Facebook page:

My Web Site:

Join My Mailing List:  

My Flickr page: